305610A Double row angular contact ball bearings

Y2 - ISO Factor6:2.07; D:359.993 mm; Bearing Weight:59.9 Kg; e - ISO Factor3:0.32; Reference Thermal Speed Rating (Grease):1200; Y0 - ISO Factor4:2.11; B - Inner Ring Width:120 mm; Cage Type:EMB; Bore Taper:1/12; B - Outer Ring Width:120 mm;

Designation of housing:PA205N-; J:56 mm; Weight:0.69 kg; G:M6x1; H2:72 mm; Z:17.2 mm; S:7.5 mm; C0:7.88 kN; A1:23 mm; C:14 kN;

H3:140; A4:36.5 mm; G:R1/8"; Weight:4.22 kg; s1:26.85 mm; Designation of housing:FEE212-; d:61.91 mm; A1:16 mm; B:53.7 mm; A2:55.8 mm;

G:M6x1; C:43.55 kN; L1:106 mm; T min.:-40 °C; L3:95 mm; Weight:3.8 kg; H:146 mm; H2:102 mm; B:55.6 mm; N:35mm;

C0:178 kN; e:60 mm; Recommended tightening torque for set screw:75 Nm; Designation of bearing:UC322G2T04; A:96 mm; s1:58.5 mm; B:117 mm; Weight:34.7 kg; N:41mm; L:340 mm;

Cor - Static Load Rating:25848 lbf; Support Type:Two-Bolt Plummer Blo; Bearing UPC:013992025784; Cr - Dynamic Load Rating:23118 lbf; Series Type:Light Series; Dimension L :11 in; Maximum Speed:3940 rpm; Dimension J1 :9-1/2 in; Dimension J2 :8-21/32 in; Dimension H :3 in;

B:74.613 mm; C0 - Static Radial Rating:263000 lbf; d:139.700 mm; C - Cup Width:57.150 mm; Cg - Geometry Factor:0.116; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30300 lbf; C1 - Dynamic Radial Rating (1 million revolutions)5:176000 lbf; Aa - Cage-Cone Backface Clearance:6.9 mm; B - Cone W

Designation of bearing:EX202G2L4; H:112 mm; A1:10 mm; T max.:100 °C; s1:30.5 mm; Recommended tightening torque for set screw:5.5 Nm; A2:45.5 mm; C:12.8 kN; Z:27.3 mm; T min.:-20 °C;

L:95 mm; G:R1/8"; d:22.22 mm; A1:11 mm; B:34 mm; N:11,5mm; Designation of housing:FE205-; S:14.3 mm; Recommended tightening torque for set screw:3.7 Nm; A:30 mm;

N:9mm; T max.:100 °C; H1:2.4 mm; Recommended tightening torque for set screw:3.5 Nm; T min.:-20 °C; S:6 mm; L:85.7 mm; C0:4.78 kN; A:25.4 mm; B:22 mm;

Mass:0.19 kg; ra max:1 mm; f0:15.2; Nlim (grease):10,000 rpm; Fatigue limit load, Cu:0.52 kN; Characteristic cage frequency, FTF:0.43 Hz; B:15 mm; Da max:63 mm; Characteristic rolling element frequency, BSF:6.66 Hz; rs min:1 mm;

C:12.8 kN; L1:61 mm; L2:10 mm; C0:6.65 kN; N1:16 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:T204N-; Designation of closed end cover:SCC204; H1:76 mm; T min.:-20 °C;

d1:37.9 mm; Characteristic rolling element frequency, BSF:4.62 Hz; Characteristic inner ring frequency, BPFI:5.43 Hz; Da max:57 mm; Brand:SNR; Nref:12,000 rpm; f0:13.8; Radial clearance class:C3; Mass:0.2 kg; D1:55.1 mm;

J:82.5 mm; G:R1/8"; d1:44.1 mm; L:108 mm; Z:55.5 mm; S:18.2 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:200 °C; Designation of housing:FE206N-; Weight:1.26 kg;